manualshive.com logo in svg

Basler BE1-32 O/U, Инструкция по эксплуатации, Страница: 67 / 68

Поделиться
Скачать
Basler BE1-32 O/U Скачать руководство пользователя страница 67

BE1-32R, -32 O/U MANUAL CHANGE INFORMATION

7-1

SECTION 7 • MANUAL CHANGE INFORMATION

SUMMARY AND CROSS REFERENCE GUIDE

This section contains information concerning the previous editions of the manual.  The substantive changes to
date are summarized in the Table 7-1.

Table 7-1.  Changes

Revision

Change

Date/ECA

E

Revised the entire manual to the current instruction manual for-
mat.  Added internal connection diagrams, typical connection dia-
grams, and in Section 1, phase rotation sensitivity.

02-16-94/13989

F

Added 120 Vac to Figure 1-11, power supply type P.  Changed
reference for Figure 1-12 from Specifications, Timing Accuracies,
to Timing Adjustment Range.  Added Figure 1-13, Overpower In-
verse Time Characteristic Curves.  Corrected Figure 3-8, input
sensing terminal numbers.  Deleted reference to Figure 3-8 on
page 3-9 (Figure 3-8 was replaced by Figure 1-13).  Corrected
Figure 4-23, input sensing terminal numbers.

06-03-94/14255

G

Changed Section 1, Specifications, Pickup Accuracy from ±2 per-
cent to ±2 percent or 0.05 watts per phase.  Corrected  Section 1,
Specifications, Isolation and Section 4, Dielectric Test.  Corrected
Figure 4-20 by adding NOTE 3.  Corrected Figure 4-21 by
moving the CT sensing to phase B.  Changed Figure 4-25
(moved polarity indicators to opposite PT connections).  Correct-
ed Figure 5-5 (deleted ±30

 in illustration and changed formula). 

Changed Table 7-1 to show ECA dates and numbers.

07-18-95/15172

H

Deleted reference to Service Manual 9 1711 00 620.  Changed
Input Voltage Range and Burden Data in Power supply table in
Specifications, Section 1.  Added information to Instantaneous
Response Time also in Specifications.  This included adding a
Figure 1-13 for the underpower element and accompanying
statements to describe it.  Corrected Style Chart by adding 120
Vac to power supply type P and changed power supply type T
from “250/230 Vac” to “250/240 Vac”.  Added information to
Pickup Accuracy in Specifications which separated Single and
Three-phase.   Added new power supply information to Section 3
in Power Supply paragraph starting with “Basler Electric
enhanced the power supply design...”.  Added new dimension
figures to include all options available (S1 Single-Ended and
Double-Ended, M1 Double-Ended, and both mounting positions).
Changed the symbol for case ground in Internal Connection
Figures. Changed the format of the manual.    

06-30-98/16839

www 

. ElectricalPartManuals 

. com

Содержание BE1-32 O/U





































































Отзывы:

Нет отзывов