Bask Aerospace AeroDrone MR4 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 31

Bask Aerospace AeroDrone MR4 Скачать руководство пользователя страница 3

Bask Aerospace

AeroDrone MR4 - Getting Started Guide

1. Introduction

Welcome to the AeroDrone MR4 Mk4 Getting Started Guide. Here you’ll be able to find out everything you need
to know in order to fly your system safely.

Although this system is easy to use, it does have a number of advanced features that require your complete
understanding to operate the vehicle safely and within regulations. We encourage you to read through this entire
guide before trying to fly, so that you have a solid understanding of these features and their operation. It’s also a
good idea to download or print this guide and have it with you when flying, in case you need to refer to it at any
stage.

Reading this Guide

When reading through this document you’ll notice different coloured callouts that provide additional information;

NOTE or REFERENCE

These provide additional information that will be useful to read or point you to a section of the document that is
relevant to what you’re reading.

HINTS and TIPS

These are worth reading to understand a topic further, and maybe even save some time.

IMPORTANT MESSAGE

Please read and understand each of these messages before moving on. If there’s something you don’t
understand please

for clarification.

WARNING

Warnings are vitally important to your safety and the safety of others. Please read and follow them carefully
before completing any steps associated with them.

Downloading/Printing this Guide

You can download and print a copy of this guide by clicking the download PDF icon

at the top of the

page.

If you download or print this guide, please remember to regularly check back to this online guide to make sure

Copyright Bask Industries 2017. All rights reserved. 3 / 31

«
1
2
3
4
5
...
»

Содержание AeroDrone MR4
































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды