Bask Aerospace AeroDrone MR4, Руководство по началу работы

Страница: 27 / 31

Bask Aerospace
AeroDrone MR4 - Getting Started Guide
The arming switch blinks red when not activated and stays solid red when activated.
The Arming Gesture
Now that you’ve activated the arming switch the aircraft is ready to be armed. The last step is to perform the
arming gesture on the remote controller.
Once you complete the next step the motors will begin to spin at idle. Although the aircraft won’t go anywhere it’s
vital you ensure that both you and anyone around are well clear of the propellers.
To do this, push and hold the throttle stick to the bottom right-hand corner for roughly five seconds. This will
command the aircraft to arm. The status LED should go solid green and a long tone will be emitted indicating the
aircraft is now ARMED.
If this is the first time you’re arming the aircraft since connecting the battery, you will notice the status LED runs
through a flashing red and blue stage before going to solid green. This is normal and should be expected.
Do not hold the stick to the right for more than 10 seconds otherwise you may activate a calibration mode.
Copyright Bask Industries 2017. All rights reserved. 27 / 31