2
ENGLISH
MODULAR LAMP
1. Contents of packaging
-
1 LED linkable lights
-
1 Power adapter
-
1 Instruction sheet
2. Special features
-
47 LED’s per module
-
Chasing flashing function
-
Sound response sensor and sensitivity adjustment
3. Attention
Read the all instructions before using this product. These contain important advice on operating and
handing the device.
Always keep the enclosed operating instructions for future reference!
4. Correct operation
This product may only be used indoors. All contact with moisture and humidity should be avoided.
Using the device other than specified may cause damage to the product, and is also linked to potential
dangers such as short-circuits, fire, or electric shock. Do not change, adapt or open the product in any
way!
5. Safety guidelines
The manufacturer will not be liable in the event that personal injury or consequential damage results
from failure to observe these safety guidelines and the incorrect use of the device.
-
Never attempt to open the device.
-
Repairs should only be done by qualified repair personnel!
-
Ensure that the device is ventilated. Never cover it during operation.
-
Avoid subjecting the device to excess stress or strain.
-
Do not expose the device to high temperatures, strong vibrations or high levels of dampness or
moisture.
-
Use only the components included with the product in conjunction with the device.
-
Keep the device out of the reach of children and animals.
-
The device is only suitable for use indoors. Please protect the device from dampness and
moisture.
-
The device can be considered unsafe in the event that:
1. The lighting controls or power adapter exhibits visible damage,
2. The device no longer functions,
3. The device has been placed under excess stress or strain during transportation.
6. Operation
1. Connect the individual spots’ connections to the corresponding sockets on the control unit.
2. Connect the power adapter to the control unit.
3. Then, switch on the device using the “ON/OFF” switch.
4. You can now select the “SPEED” or “MUSIC” functions using the two adjustable controls on the
front of the control module.
5. To activate the device’s chasing function, turn the “MUSIC” control to the left (selecting the first
possible setting). You can now use the “SPEED” control to adjust the flashing speed.
6. The “Sound response” function is activated using the left control. The light spots now react both to
the light sequence and sounds. You can adjust the microphone’s sensitivity. Select the desired
flashing speed using the “SPEED” control and adjust the integrated microphone’s sensitivity level
using the “MUSIC” control. The light spots will now flash according to the intensity of the sound
near the unit.
