Zenith SeRieS
7
EXPANDABLE/RETRACTABLE SLEEP DECK SUPPLEMENTAL MANUAL
GF Health Products, Inc. - www.grahamfield.com
Expandable/Retractable Sleep Deck Supplement 999-0881-190B MARCH 2013
SPECIAL MATTRESS RETAINER INSTALLATION
FOR EXPANDABLE/RETRACTABLE SLEEP DECK
(Part # 999-0881-001 & 999-0881-002)
IMPORTANT
1. The Expandable/Retractable Sleep Deck features two sets of two unique Mattress Retainers
that are positioned in the corners at both the head end and foot end of the bed.
2. To install, position the mattress retainer above the sleep deck corners, with rod ends
perpendicular to the sleep deck surface.Long crooked bent ends go on outside.
3. Insert the rod ends into the appropriate 80” bed or 76” bed holes
(
see insert - bottom right
).
4. Once engaged, tilt the retainer toward the corner so
that the retainer’s “elbows” rest on the deck.
MATTRESS RETAINERS
MUST MATCH BOARD
& WALLSAVER POSITIONS.
SEE EACH BED MODEL’S
SERVICE MANUAL.
To attach the
four (4) Mattress
Retainers insert
rod ends into
holes in corners
of sleep deck,
then lay down
toward corners.
Outside
corner
holes
used for
80” bed
position.
Inside holes
used for 76”
bed position.
NOTE: CROOKED
END ALWAYS
GOES ON THE
OUTSIDE.
When in final
position all
the retainers’
“elbows” rest
on the sleep
deck surface.
LH Foot-end
Mattress Retainer
(Part # 999-0881-001)
HEAD
END
FOOT
END
RH Foot-end
Mattress Retainer
(Part # 999-0881-002)
LH Head-end
Mattress Retainer
(Part # 999-0881-002)
RH Head-end
Mattress Retainer
(Part # 999-0881-001)
