• Do not cover the lamp while it is in operation! Covering the lamp may cause it to
overheat and result in a fire.
•
The LEDs are permanently installed and cannot be replaced.
•
Check the product’s power rating before connecting it to a power source.
•
Never connect the product to an AC power source.
•
Consult a technician if you are not sure how to use or connect the product.
•
Maintenance, modifications and repairs must be done by a technician or an
authorized repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
Operating elements
1
6
4
2 3
8
7
5
1 Cover
2 Opening for screw mounting
3 On/off switch
4 Lighting level switch (5 levels)
5 LED illumination
6 Cold light button
7 Warm light button
8 Connection cable
Item no. 1539344
Item no. 1539345
Installation
Modifications to the vehicle which are necessary due to the installation of the lamp
must always be carried out in such a manner that neither the traffic safety nor the
designed stability of the car is impaired. If you are in doubt when selecting a place
for installation, consult your vehicle dealer.
Before drilling the attachment holes, make sure that the electric cables, brake lines,
fuel tank or similar systems will not be damaged.
When using tools for mounting your device, observe the safety instructions of the
manufacturer.
When installing the lamp, take into consideration the risk of accident which can arise
from devices being torn away in case of an accident. Therefore, fasten the lamp
securely and in a location where it will not pose a risk to passengers.
Operating instructions
Interior lamp 12/24 V
Item no. 1539344 - Model C2-259S with 28 LEDs
Item no. 1539345 - Model C2-259D with 56 LEDs
Intended use
This product serves as an interior lighting source in motor vehicles, caravans and boats. The
product features a touch panel for adjusting the brightness and white hue (cold-white and
warm-white). The product features either 28 LEDs (item no. 1539344) or 56 LEDs (item no.
1539345). Connect the product to a 12 V/DC or 24 V/DC on-board electrical system. The cover
can be removed to attach the interior lamp. The lamp also has holes for screw mounting.
For safety and approval purposes, you must not rebuild and/or modify this product. Using the
product for purposes other than those described above may damage the product. In addition,
improper use can cause hazards such as short circuits, fire and electric shocks. Read the
instructions carefully and store them in a safe place. Make this product available to third parties
only together with its operating instructions.
This product complies with statutory national and European regulations. All company and
product names are trademarks of their respective owners. All rights reserved.
Package contents
• Interior light
•
4x screws (item no. 1539344), 6x screws (item no. 1539345)
• Operating instructions
Up-to-date operating instructions
Download the latest operating instructions at
www.conrad.com/downloads or scan the QR code
on this page. Follow the instructions on the website.
Explanation of symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
This symbol is used to highlight important information in these operating instructions.
Always read this information carefully.
This symbol indicates special information and advice on how to use the product.
Safety information
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
•
This product is not a toy. Keep it out of the reach of children and pets.
•
Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
•
Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorized use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
-
has been subjected to any serious transport-related stress.
•
Always handle the product carefully. Jolts, impacts or a fall even from a low height
may damage the product.
• Also observe the safety and operating instructions of the vehicle the product is
connected in.
•
Warning, LED light:
Do not look directly at the LED light!
Do not look into the beam directly or with optical instruments!
