background image

Basementsaver Battery Powered Backup Sump Pumps -

 

www.basementsaver.com

 - 

Call 716.775.0206

 

 

Updated Jan 2016 

Operating The Battery Charger 

- Your battery charger is waterproof, but whenever possible, it is best to place 

the charger in a dry location, not in open areas exposed to rain, or in locations that are subject to wash down or 
water-spray. The Battery Charger is designed to work with lead acid (flooded), absorbent glass mat (AGM) 
batteries, or Gel type batteries. Charge time will vary depending on the ampere-hour rating of the battery. The 
Battery Charger generates a moderate amount of heat while charging. The temperature of the unit may rise up to 
35

C/ 95

F above the charger environment temperature.  Please exercise caution when handling the charger 

while in use. 

The Battery Charger is a self-contained unit that requires no maintenance under normal 

operating conditions. 

 

Battery Charger Troubleshooting 
Lost AC Power - 

Check for open AC line fuse or circuit breaker. Check for wiring or other causes for fuse failure 

or circuit breaker tripping. 

Lost DC Output To Battery - 

Check for poor battery connections: check the DC output battery cable 

connections at the battery and at the charger’s DC output terminal strip. Check for an open DC fuse, faulty wiring 
or other causes of fuse failure 

Lost AC Power Supply - 

Obtain service from a qualified service provider. 

 
 
 
 
 

 

Basementsaver Battery Backup Pump 30 Day Customer Satisfaction Guarantee 

Within 30 days of purchase, if you are not completely satisfied with your 

Basementsaver Battery Powered Backup Sump 

Pump

, The Company will refund your money, in full, excluding shipping charges. 

Please Call 

716.775.0206

 to process return or to receive Technical Assistance. Please give your name, address, phone 

number, date of purchase, and model number

 

Basementsaver Battery Backup Pump 2 Year Limited Manufacturers Warranty 

The manufacturer warrants this 

Basementsaver Battery Powered Backup Sump Pump

 against 

defects

 in material and 

workmanship for a period of 2 Years from the date of the shipment. 

In the event of any defect in the pump unit within the warranty period, The manufacturer will, at its option, replace or 

recondition the product without charge providing the product is returned, prepaid to our warehouse in Buffalo, New York. This 

shall constitute the exclusive remedy for any alleged defect. The manufacturer shall not be responsible for any incidental, 

indirect, contingent, or consequential damages, including, without limitation, damages or other costs resulting from labor 

charges, delays, loss of use, revenue or profit, vandalism, negligence, fouling, caused by foreign material, damage from 

peculiar water conditions, chemicals or other circumstances over which the manufacturer has no control. The manufacturer 

makes no other warranties, express or implied, except as provided in this limited warranty. This warranty becomes void by 

any misapplication, misuse, abuse, or improper installation of the product. This warranty gives you specific legal rights and 

you may also have other rights which may vary from state to state. 

Warranty Applicable in the USA and Canada, Only.

 

 

Basementsaver Battery Backup Pumps Return Policy 

If you need to return an uninstalled and unused pump please Call 

716.775.0206

 for return information. 

If the pump has been installed and you choose to return it, please Call 

716.775.0206

 for return approval. 

Please be prepared to give your name, address, phone number, date of purchase, and model number

.

 

The Manufacturer is not responsible for any cost incurred with removal or pump repairs. Proper packaging of the returned 

product is the customer’s responsibility, and any damaged goods, or goods damaged in transit as a result of improper 

packaging will not be considered for credit.

 

 

After Installation, Please Place These Instructions Back Into The Plastic Bag They 

Came In And Use The Enclosed Beaded Tie Wrap To Hang The Bag On Or Near 

Your Basementsaver BP3 Battery Backup Sump Pump For Future Reference! 

 

Содержание BP3








Отзывы: