base engineering MEC EXCELA-WYND ME9000LH-17 Скачать руководство пользователя страница 10

 

 

ME9000LH-17/25 EXCELA-WYND

 HOSE REEL (Patent Pending) 

INSTALLATION AND OPERATING INSTRUCTIONS

 

 

 

 

Form #1176, Excela-Wynd™ Hose Reel IOM 

Page | 10 

Rev B

 12/1/21 

 

WARRANTY INFORMATION

 ___________________ 

 

WARNING 

 

Marshall Excelsior’s products are mechanical devices made of 

materials such as rubber and metal, and are subject to wear, the 

effects of contaminants, corrosion, and aging, and these devices will 

eventually become inoperative.  Regular inspection and 

maintenance is essential.  Marshall Excelsior’s products have a long 

record of quality and service, and therefore LP-Gas dealers may 

forget hazards that can arise from using aging devices that have 

outlived their safe service life.  The safe service life of these 

products will be affected by the environment and the conditions of 

their use.  The LP-Gas dealer knows better than anyone what this 

environment and the conditions of use are. 

 

There are developing trends in state legislation and proposed 

national legislation making the owner of products responsible for 

replacing products before they outlive their safe service life.  LP 

Gas dealers should be aware of such legislation as it affects them. 

 

All Marshall Excelsior products must be installed, inspected and 

maintained by a trained and experienced professional adhering to 

all installation instructions, product and safety warnings, local, 

state, and federal regulations, codes and standards and any other 

standards set by, but not limited to, NFPA, DOT or ANSI. 

   

LP-Gas is a highly explosive and flammable gas that should never 

be vented near a possible ignition source.   

 

LIMITED WARRANTY 

 

THIS WARRANTY for Marshall Excelsior manufactured products 

is provided by Marshall Excelsior, Inc., 1506 George Brown Drive, 

Marshall, MI  49068.  Marshall Excelsior, unless otherwise 

specified in writing, warrants to the original buyer that for a period 

of three (3) years from the date of manufacture its  products and 

repair kits will be free from defects in material and workmanship 

under normal service and use.  This warranty covers manufacturing 

defects only, and does not cover defects and product non-

compliance due to, misuse, alteration, neglect, accident, fire, or 

other external causes, alterations, or repairs.  This limited warranty 

also does not cover normal wear and tear.  During this warranty 

period, if a defect arises in the product, and you follow the 

instructions for returning the product, Marshall Excelsior will, at its 

option, to the extent permitted by law, either (i) repair the product 

using either new or refurbished parts, (ii) replace the product with a 

new or refurbished product that is equivalent to the product that is 

to be replaced, or (iii) refund to you all or part of the purchase price 

of the product.  This limited warranty applies to the extent permitted 

by law, to any repair, replacement part or replacement device for 

the remainder of the original warranty period or for ninety (90) days 

whichever period is longer.  All replaced parts and products for 

which a refund is given shall become the property of Marshall 

Excelsior.  This is the only warranty or representation made by 

Marshall Excelsior, and the sole basis for liability respecting 

quality, performance, defects, repair, delivery, and replacement of 

products and repair kits.  The foregoing shall constitute Marshall 

Excelsior’s sole liability. 

Marshall Excelsior does not warrant any product or part that has 

been altered, accidentally damaged, disassembled, modified, 

misused, neglected, not properly maintained or installed.  Marshall 

Excelsior does not warrant cosmetic issues including but not limited 

to dents, scratches, product discoloration, color fading or any other 

imperfection that does not affect the functionality of the product.  

Marshall Excelsior does not warranty any product or part not 

installed according to Marshall Excelsior’s installation instructions 

or installed in violation of any regulation or warning by state, local, 

or federal regulators, or in violation of any standard or code set by, 

but not limited to, NFPA, DOT or ANSI requirements. The 

foregoing shall constitute Marshall Excelsior’s sole liability to 

distributors, vendees and end users. NOTE: Warranty does not 

include hose, as it is not manufactured by MEC. 

 

LIMITATIONS 

 

TO THE EXTENT PERMITTED BY LAW, THE WARRANTY 

AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND 

IN LIEU OF ALL OTHER WARRANTIES AND REMEDIES, 

AND MARSHALL EXCELSIOR SPECIFICALLY DISCLAIMS 

ALL 

STATUTORY OR IMPLIED WARRANTIES, 

INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF 

MERCHANTABILITY, FITNESS FOR A PARTICULAR 

PURPOSE AND AGAINST HIDDEN OR LATENT DEFECTS.  

IF MARSHALL EXCELSIOR CANNOT LAWFULLY 

DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN 

TO THE EXTENT PERMITTED BY LAW, ALL SUCH 

WARRANTIES SHALL BE LIMITED IN DURATION TO THE 

DURATION OF THIS EXPRESS LIMITED WARRANTY AND 

TO REPAIR OR REPLACEMENT AND SERVICE. 

 

MARSHALL EXCELSIOR IS NOT RESPONSIBLE FOR 

DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL 

DAMAGES RESULTING FROM ANY BREACH OF 

WARRANTY OR UNDER ANY OTHER LEGAL THEORY.   

 

MARSHALL EXCELSIOR’S LIABILITY (EXCEPT AS TO 

TITLE) ARISING OUT OF THE SALE, USE OR OPERATION 

OF PRODUCTS OR REPAIR KITS, WHETHER ON CLAIMS 

FOR BREACH OF WARRANTY, CONTRACT, NEGLIGENCE 

OR OTHERWISE (INCLUDING CLAIMS OF 

CONSEQUENTIAL OR INCIDENTAL DAMAGES) SHALL 

NOT IN ANY EVENT EXCEED THE COST OF FURNISHING 

OR REPLACEMENT OF THE DEFECTIVE PRODUCT OR 

REPAIR KIT. 

 

WARRANTY CLAIMS AND NOTICE 

 

Warranty claims shall be made in writing to Marshall Excelsior’s 

Home Office at 1506 George Brown Drive, Marshall, Michigan 

49068 by the distributor, vendee or end user within twenty (20) days 

of discovery of the defect and the product must be postmarked and 

shipped F.O.B. origin to Marshall Excelsior’s Home Office within 

thirty (30) days of the discovery of the defect.  Marshall Excelsior  

 

 

Содержание MEC EXCELA-WYND ME9000LH-17
















Отзывы: