Base aire AirWerx 55, Руководство по установке и эксплуатации

Страница: 8 / 16

Indicator Lights
6
One application for the remote control is to install the dehumidifier in one room with the conditioned
air ducted into a second room that contains the remote. For example, the dehumidifier could be
installed in a laundry room and ducted into a living room. The remote would then be mounted in the
living room so the remote sensor can control the humidity and provide easy controls for the user.
AirWerx Dehumidifiers can be controlled using an optional remote accessory. The AirWerx Remote
Control connects to your Airwerx Series Dehumidifier via a 25' CAT 5 cable. The remote control
contains an integrated sensor which gives you multiple options for remotely controlling your unit, in
addition to monitoring the conditions surrounding the dehumidifier.
Another useful application for the remote control is if the dehumidifier is in area that
'
s difficult to
access on a regular basis. For instance, if your dehumidifier is installed in your crawl space, the
remote could be mounted in your living space or garage. This provides you with an easy way to
monitor the dehumidifier.
Remote Control Instructions
1.Humidity Display Screen
The display screen has two functions:
2.Power Indicator Light
3.Continuous Mode/autodefrost Light
This light indicates that the unit is properly powered on and ready to operate. Always make
sure the unit is "off" prior to performing any service.
When this light iluminates green, it indicates that the dehumidifer is set to continuous
operation mode.
1. When the unit is powered on, it shows the humidity of the space.
2. While setting the desired humidity level, the screen wil show the set humidity. After a brief
delay,the display will revert to current humidity level.
When the light glows red, it means the unit is in auto defrost mode and clearing the
evaporator coil of any ice buildup.
When the compressor light glows red, it indicates the compressor has been initiated but is
currenty warming up.
Once the compressor light switches to green, it indicates the compressor is in working
status.
4.Compressor Light