Installation instructions
1. Install square wall box (60mm) or compatible round wall box.
Wall box should have screws with a vertical distance of 60mm and minimal depth of 45mm.
For 2-gang and 3-gang installations, the horizontal center distance should be 71mm.
2. Connect the RJ45 outlet using the Panduit (MINI-COM) connector to the cat5e or cat6 cable.
Connection can be made using T568A/B universal wiring.
3. Fix the outlet to the wall box with 2 screws using the holes on vertical axis.
Ensure the position of the outlet corresponds to figure 1.
For 2-gang and 3-gang sockets, use the alignment guides for positioning of the outlets.
4. Mount the cover frame using the clips. ( see drawing a & b )
How to remove the Socket front cover
( see drawing c & d )
PUSH FORWARD & CLICK ON THE CLIPS ABOVE
CLICK ON THE CLIPS BELOW
Installation Manual
© 2017 basalt
e v1.2
SOCKET RJ45
basalte bvba | hundelgemsesteenweg 1A | 9820 merelbeke | belgium
t +32 (0)9 385 78 38 | f +32 (0)9 329 66 95 | www.basalte.be | [email protected]
PUSH UP
PULL BACKWARDS
Technical data
• RJ45 outlet with Panduit (MINI-COM) connector
• 0403-03: Cat5e unshielded
• 0403-13: Cat6 shielded
• T568A/B universal wiring
a
b
c
d
