BO.sensor
Manual
12
/
39
v.1.7
© 2014 basalte
2.2
Controls
Controls page
2.2.1
Adding functions 1-10 in Beo4
The function 1-10 can be manually added in the Beo4 remote. The following procedure describes
how to add these:
•
Press and hold the standby button.
•
Press LIST to get access to the Beo4 setup function.
•
Release both buttons. ADD? Appears in the display.
•
Press the centre button and use to select AV?, LIGHT? or CNTROL?
•
Press the centre button to bring up the list of extra ‘buttons’ to add from. The first ‘button’
appears in the display, it flashes on and off.
•
Press or to move forwards or backwards in the list of extra ‘buttons’.
•
Press the centre button to add and place the ‘button’ on its preset position in the list, or
press 1 – 9 to insert the ‘button’ at a specific position in the list.
•
ADDED appears, indicating that the ‘button’ has been added. Long press on BACK will leave
the setup.
Adding function 11-40 in Beo 5 & 6
•
Select Edit in the Setup menu.
•
Use the touch screen buttons to select first the zone, then the source of the button you
wish to edit.
•
Press the relevant touch button, then press the centre button to select the button you wish
to edit; the buttons currently hidden are shown in grey.
•
Press the centre button again to edit the button. Your changes will automatically be saved
when you leave the menu.
