Installation and operation
20 / 24
1062213
EN
Ignition of burners
Fig. 8
1. Rotate left gas knob (5) (fig.
8) from position ‘0’ by 90° anti-clockwise, press
down the gas knob and the red button of Piezo igniter (6) to ignite the left burner
(8).
2. Hold the knob pressed for another 10 seconds so the burner remains in the
operation mode.
When flame goes off, it may be reignited after approx. 2 minutes.
3. Then ignite the second burner (9) by pressing and rotating another knob anti-
clockwise.
Use the same procedure for the third (10) or fourth burner.
ATTENTION!
Always start the burner adjacent to the already ignited one in order to
transfer the flame.
4. After the burner is ignited, set the gas knob in required position. Select small or
big flame (paying attention to symbols on the knob).