- 33 -
•
In case of leaks check connections, retighten them, and repeat the tightness test as
described above.
•
Clean the device and its equipment before use. Follow the instructions in section
6
.
“Cleaning and maintenance”.
User instructions
•
The grill frying pan (1061933) should be heated slowly before use, absolutely not
using full power, in order to avoid the material damage. Never heat the frying pan
without grease!
•
While using the grill frying pan (1061933) do not use the dripping tray. Otherwise the
damages may occur leading even to the malfunction of the whole device.
•
Before using the grill grid (1061633) fill the dripping tray with small amount of water
and slide it into the guides under the frame. Never use the device without the dripping
tray.
•
While using the grill grid do not place any foils on it or between the grid and the flame
cover as the heat accumulation may occur. There is the
fire hazard!
Ignition of burners
WARNING! Risk of burns!
Do not lean over the device during flame ignition!
High flame may cause burns.
•
Rotate left gas knob (7) (fig. 5) from
position
“0”
by 90° anti-clockwise and
press red button of Piezo igniter (3) in
order to ignite left burner (6). Hold the
knob pressed for another 10 seconds so
the burner remains in the operation mode.
When flame goes off, it may be reignited
after approx. 2 minutes.
•
Then ignite another burner by pressing
and rotating another knob anti-clockwise.
7
3
6
Fig. 5
