- 36 -
NOTE!
The device is provided with the protection that switches off the heaters
automatically when the heater has been hit or tipped over (e.g. when it has
been tipped over by a blow of wind). When lifted up, the device needs to be
restarted.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
The power supply circuit with the socket must be protected by the fuse of at least 16A.
Connect the device directly to a single grounded socket. Do not use any power bar or
multiple socket.
5.2 Operation
Before use, clean the device according to the instructions set out in point
6
“Cleaning”
.
Connect the device to a single grounded socket.
WARNING! Risk of burns!
Some heater elements may become very hot and cause
burns. Always supervise the device operation when there
are children or vulnerable people present.
Thermal radiation of particular heaters cannot be reduced: when on, the heater
heats with full power.
