- 43 -
7. Possible Malfunctions
In case of any malfunction, disconnect the device from the power supply.
Based on the table below, check whether it is possible to remove defects without
notifying a customer service point or contacting the sales agent.
PROBLEM
CAUSE
SOLUTION
The device is switched on.
The control light is not lit
and the device is not
heating up.
No power supply.
Damaged temperature
regulator.
Check the power supply
and the connection cable.
Contact the sales agent.
Temperature is set, the
control light is lit, but the
device is not heating up.
Damaged heating
element.
Contact the sales agent.
Temperature is set, it is
increasing, but there is no
possibility to adjust it.
Damaged temperature
regulator.
Contact the sales agent.
Temperature is set, the
device is heating up, but the
control light is not lit.
Damaged control light.
Contact the sales agent.
If you cannot remove the malfunctions:
-
do not open the body,
-
notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
code number and serial number (see identification plate
on device underside);
date of purchase.