- 24 -
5. Installation and operation
5.1 Installation
Mounting
•
Unpack the device and remove the packing material.
CAUTION!
Never remove the nameplate and warning signs from the device.
•
Prepare everything needed to install the device.
•
Install the hand dryer so that it is located directly on the way from the sink to the exit,
as this will allow the user easy access to the device.
•
Install the device at a height of 800 - 850 mm over the floor.
9
Fastening plate
10
Wall plug
11
Screw
12
Fastening screw cap
13
Fastening screw
•
Loosen both fastening screws
13
under the caps
12
.
•
Next, remove the upper fastening plate
9
from the rear of the device by sliding it
down from the hooks.
9
10
11
12
13
