![background image](http://html.mh-extra.com/html/bartscher/iw-35/iw-35_instruction-manual_476634019.webp)
- 38 -
7. Cleaning
CAUTION!
Before cleaning, switch the device off by pressing
ON/OFF button and disconnect the device from the
power supply (pull the plug!). Leave the device to cool
down.
Never clean the device with the use of water jets.
Protect the device from the water penetration.
WARNING!
Never use sharp or abrasive cleaning agents which may damage the surface
of the device.
Never use cleaning agents containing petroleum or solvents.
o
Clean the device regularly.
o
Clean the
concave cooking zone (hob)
and
housing
of the device with a soft,
moist cloth and mild non-abrasive cleaning agent.
o
Wipe the
cooking zone
(hob)
with a mild, moist cloth.
o
After cleaning, thoroughly dry the cleaned surfaces.
o
Regularly clean the
particle and grease filter
with a mild cleaning agent or in the
dishwasher. To perform this operation, remove the filter by pulling it forward (see
chapter
4.2 Particle and grease filter
). After cleaning, replace the fully dried filter in
the device.
CAUTION!
To avoid injuries and damage, do not connect the device to the power supply
or activate it without filter.
o
Ensure the rear ventilation ducts are always free from dust and dirt, and clean them if
necessary (e.g. using a brush or blower).
o
Use only soft cloths,
never
use any cleaning materials that could scratch the
surface.
o
After cleaning, use a soft, dry cloth to wipe dry and polish the surface of the device.