Bartscher FTG92MC1, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 28

3
ENGLISH
GB
3. SAFETY

Read carefully the guidelines and
instructions in the instruction manual
before you use the device.
The
instruction manual contains general
information on how to safely use and maintain the
appliance.
Retain the manual for future reference.
The manufacturer took extra care when designing
and manufacturing to prevent any safety or health
hazard to the personnel operating the appliance.
Please read carefully the guidelines in the
instruction manual and instructions placed directly
onto the appliance. Above all, observe all the
safety instructions.
Do not intervene in or remove the protective
appliances installed in the appliance. Non-
compliance may lead to severe safety and health
hazard against people. We recommend to perform
a few tests to know the layout and main functions
of the control panel, particularly those to switch
the appliance on and off.
The appliance is intended only for the use it has
been designed for and any other use is
considered as the use not in compliance with the
intended use.
The manufacturer is not liable for material
damage or damage to person caused by
misapplication or incorrect application of the
appliance.
Any maintenance work that requires special
technical license or special skills may be
performed by qualified personnel only.
To provide hygiene and protect foods from dirt, all
the elements that have direct or indirect contact
with the foods and all border areas must be
thoroughly cleaned. Use only the cleaning agents
intended for use in contact with food and avoid
using flammable agents or harmful to health.
After every use of the device,
make sure that the burner is switched
off, control elements are deactivated
and gas supply line is disconnected.

During the installation, setting and
connection of the device to the gas supply
(Chapter
8 „INSTALLATION”
) appropriate
safety measures need to be taken.

In case of prolonged interval in using
the device disconnect all power supply cables
and thoroughly clean the inside and outside
elements
of the device (Chapter 6
„CLEANING AND MAINTENANCE”
).

Never clean the device with jets of
water.