![background image](http://html1.mh-extra.com/html/bartscher/ftg92mc1/ftg92mc1_installation-operating-and-maintenance-instructions_4045096016.webp)
14
ENGLISH
GB
Follow these instructions.
1.
Close the gas valve.
2.
Remove the gas control knob (
A
).
3.
Loosen the screws (
B
) and remove the
control panel (
C
).
4.
Take out the injector
D
and replace it for a
new one which is appropriate for the used
type of gas (see attachment). After the
setting seal the screw.
5.
Finally, reattach the control panel (
C
) and
the gas control knob (
A
)..
After completing all calibration
and adjustment work, check the gas
installation for leakages and whether
the device operates properly.
Make sure that the flame is stable
at
minimum
and
maximum
output
pressure
.
After adjustments, attach the prepared
sealing marks and/or seal calibration screws.
9.3.
Replacement of burner nozzles
Follow these instructions.
1.
Close the gas valve.
2.
Remove the gas control knob (
A
).
3.
Loosen the screws (
B
) and remove the control
panel (
C
).
4.
Remove the nozzle C and replace it with a
nozzle intended for the used gas (see table).
5.
Finally, set the device to the initial status
ID 17
D
C
A
B
C
A
B
D
Содержание FTG92MC1
Страница 19: ...I ANLAGEN ATTACHMENTS ANNEXES ALLEGATI ANEXOS ANEXOS BIJLAGEN ZAŁĄCZNIKI ...
Страница 27: ...IX NOTE ...