Bartscher FTE91MA0, Инструкция по установке, эксплуатации и обслуживанию

Страница: 11 / 22

9
ENGLISH
GB
7. PROBLEMS DURING OPERATION
The information below is provided to recognize
and repair any failures that may occur when
operating the device.
Some of the failures can be repaired by the user,
others require thorough specialist knowledge.
Such problems may be solved exclusively by the
qualified personnel.
Problem Cause Solution
The heating coils do not heat
up.
The electrical connection is not
correct.
Check the electrical connection.
Safety thermostats are on.
Reset the device (see special
section).
Damaged temperature
controller.
Replace switch.
Contact the service company.
8. INSTALLATION
8.1. Packaging and unpacking
During unloading and when installing the device
follow the information from the manufacturer
placed directly on the packaging and in this
manual.
To lift and transport the product plan to use a fork
lift or stacker, and pay attention to even weight
distribution to avoid a risk of tilting of the
packaging (avoid excessive incline!).
When using the lifting equipment
pay attention to the mains cable and
feet position.
The packaging consists of the carton packaging
and wooden pallet. There are symbols printed on
the carton packaging that according to the
international
agreements inform about the
regulations to follow when loading and unloading,
transporting and storing the device.
When collecting the goods check if the packaging
is complete and has not been damaged during
transport.
Any damage should be immediately reported to
the shipping company.
Unpack the device as soon as possible to check if
the device is not damaged.
Do not use a sharp object to cut the carton box. It
may damage the stainless steel inside the box.
Remove the carton packaging from bottom to top.
When unpacked check if the device is according
to the order.
In case of any difference inform the sales agent
immediately.
Do not store the packaging
materials (nylon bags, polystyrene
foam, clips ...) in the reach of children!
Remove the protective PVC layer from the out
and inner surfaces. If possible, do not use any
metal tools.
THIS
SIDE UP
CAUTION
GLASS
KEEP DRY