- 40 -
o
Thoroughly wipe the external and internal surfaces of the device. Use warm water,
soft cloth and mild cleaning agent for cleaning.
o
Clean the door seal with a soft cloth soaked in warm water
without using a
cleaning agent.
o
Finally, thoroughly dry the cleaned surfaces and grids.
o
Regularly remove dust and lint from the rear wall of the device with a soft brush or
dust brush.
Maintenance
CAUTION!
Unclean condenser impairs the device operation and increases energy
consumption!
The listed maintenance works must be performed by a qualified professional.
-
Cleaning the condenser with relevant tools (vacuum cleaner or soft brush);
-
checking the electric installation;
-
Check ofthermostats and sensors;
-
check the door seal for tightness and replace if damaged:
-
regularly clean the condensation water tray.
-
check the telethermostat or control board and probes.
