- 73 -
Navigation between the stored programs
To select a stored program, use
T 12
button
and select the desired program number by
turning
M
dial clock or counter-clockwise.
Confirm the selection by pressing
T 12
button
when the desired program „PRG 04“ is
displayed.
When
T 11
button is flashing the settings of
this coking/baking phase may be displayed.
Set position 1 of the phase ("STEP 1") and
press
T 16
to start the program.
The cooking process can be also started with
any phase after phase 1 by selecting the
number of the desired phase and pressing
T16
to start the oven.
In this case, the oven will not pre-heat, even if
it is included in the program.
Changing/deleting a cooking/baking
program
To introduce changes to a saved programme,
select the number of the desired programme
(see "Selecting saved programmes"). Next,
choose the cooking phase to be changed and
programme the cooking phase as desired.
After finishing, the changed programme can be
saved by pressing and holding button
T 12
for
several seconds, until LED display
D 4
reads
"MEM".
Part or all of a given program can also be
deleted.
In order to delete a particular cooking phase
from a defined program, set the program
information to the phase you wish to delete,
then press and hold button
T 11
for several
seconds until the LED
D 4
reads "dEL?N".
D 4
M
T 1
T 16
T 11
T 12
