- 28 -
PROBLEM
POSSIBLE CAUSES
SOLUTION
The ice cube making
process is normal but
does not produce any
ice cubes
The ambient temperature or
the water temperature in
the container is too high.
Make sure that ambient
temperature is below 32 °C
and pour colder water into the
container.
The cooling agent has
run out.
Contact the customer service.
The cooling tube is blocked. Contact the customer service.
The ice cube making
process has stopped
automatically
The power supply was cut
off during the ice cube
making process.
Pull the plug. Wait for a few
minutes, and then carefully
remove the ice cubes. Switch
the device on and start the ice
cube making process.
8. Waste disposal
Discarding old devices
At the end of its service life the discarded device has to be disposed in
accordance with
the national regulations. It is advisable to contact a company which is specialized in
waste disposal, or just contact the local disposal service in
your community.
WARNING!
To exclude any abuse and the dangers involved make the waste device unfit for
use before disposal. For that purpose disconnect device from mains supply and
remove mains connection cable from the device.
NOTE!
For the disposal of the device please consider and act
according to the national and local rules and
regulations.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
phone: +49 (0) 5258 971-0
Germany
fax: +49 (0) 5258 971-120
