Bartscher Compact Ice II A100.063G, Инструкция по эксплуатации

Страница: 28 / 71

- 28 -
7. Possible Malfunctions
PROBLEM POSSIBLE CAUSES SOLUTION
The indicator light
displays "Fill the water
tank."
No water in the water tank.
Turn off the device, pour in
water and then turn on the
device.
The indicator light
displays "Ice"
There are too many ice
cubes in the ice cube
basket.
Remove the ice cubes from
the ice cube bassket.
Both "Fill the water
tank" and "Ice" indicator
lights are displayed.
The ice chute can not move.
Check that the ice chute is not
blocked with ice cubes. If not,
contact customer service.
Ice cubes are sticking
together.
The ice cube production
cycle takes too long.
Turn off the device and turn it
on again when the ice cubes
melt.
Select
S - Small so that the
ice cubes will be smaller.
The water temperature
inside the water tank is too
low.
Replace the water in
the tank. The optimum
water temperature
should be 7° to -32° C.
The ice production cycle
is working properly, but
ice cubes are not
produced.
The room temperature or
the water temperature in the
water tank is too high.
The ice maker should be
used at temperatures below
32° C, and the water tank
filled with cooler water.
Coolant leakage. Contact customer service.
Blocked pipe in the cooling
system.
Contact customer service.
During the production of
ice cubes there was an
accidental loss of power
to the device.
The production of ice cubes
will be automatically
suspended.
Turn off the device and
unplug it. Wait a few minutes
and then carefully remove the
ice cubes. Turn on the device
again.
On the front panel the
indicator light flashes.