- 30 -
5.2 Operation
CAUTION!
Never fill hot water into the cold water tank.
Do not fill water into the hot device; wait until it has cooled down.
Prior to first use
•
Prior to first use, run 2 to 3 portions of water without coffee through the coffee
machine in order to rinse the device (section „Brewing coffee“, steps 1 - 8).
•
After first use (depending on the construction of the system), a small amount of water
will always remain in the reservoir. Keep this in mind when pouring water again later.
•
Always fill the water container with an
amount of water equal to the capacity
of the glass jug included with the
coffee machine. The amount of coffee
brewed will be the same as the
amount of water poured.
•
If too much water is poured into the
water container, excess water will
drain out through the flow hose.
•
Prior to use, rinse the glass jug and filter basket with warm water and a mild cleaning
agent, then rinse with clean water and dry thoroughly.
•
Wipe the device’s exterior with a moist cloth, then dry with a soft cloth.
•
Connect the device to an appropriate single outlet.
•
The coffee machine is ready for use.
Flow hose
Содержание A190053
Страница 2: ...460 Ø 165 385 215 205 178 ...
Страница 3: ...4 8 7 1 11 12 10 9 6 5 3 2 ...
Страница 6: ...460 Ø 165 385 215 205 178 ...
Страница 7: ...4 8 7 1 11 12 10 9 6 5 3 2 ...