- 28 -
5. Installation and operation
5.1 Installation
Unpack the device and remove all package materials according to the valid
environment protection regulations.
CAUTION!
Never remove the rating plate or any warning signs from the device.
Place the device on top of an even, stable, dry, and water-resistant surface which
is not heat sensitive.
Never
place the unit on a flammable surface.
Never
place the device at the edge of the table, it could tip or fall down.
Never
place the device in humid or wet environment.
Remain distance of at least 10 cm from the walls and other objects.
Never
cover the ventilation holes of the device.
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
Position the device in such way that the plug is easily accessible for quick
disconnecting when required.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance!
Connect the device only to properly installed single
socket with protective terminal.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
