- 18 -
o
Before moving the appliance into another location, make sure it has been correctly
disconnected from mains power supply.
o
If the appliance is on a wheeled base, make sure that the electric cords will not be
damaged during moving.
o
When finished with the operation and after placing the appliance in a new location,
make sure that the electric installation has been connected according to standards in
force.
7. Possible Malfunctions
In case of malfunction, disconnect the device from its power source. Before contacting
the service or sales agent, verify - based on the table below - whether it is possible to
eliminate disruption in operation.
Problem
Cause
Solution
Fermenting cupboard
does not heat up
•
Plug improperly inserted
into a socket.
•
Current circuit fuse
tripped.
•
Heating element
damaged.
•
Thermostat broken.
•
Pull the plug and re-insert it
correctly.
•
Check the fuse, connect the
appliance to another socket
and check it.
•
Contact the vendor.
•
Contact the vendor.
Temperature is set,
but the orange
heating-up indicator
light is not lit.
•
Damaged indicator light.
•
Contact the vendor.
If you cannot remove the malfunctions:
-
do not open the body,
-
notify the customer service point or contact the sales
agent, while providing the following information:
type of malfunction;
article and serial number (rating plate at the
rear of the device).
