- 12 -
vendor/manufacturer and provide them with
article number and serial number
(type
plate at the back of the appliance), as well as photo documentation.
•
Make sure that there are no elements hindering passages through doors, corridor or
other communication paths when moving the appliance to the installation location.
•
ATTENTION
: The appliance may turn over during transport, which may result in
damage to the appliance itself, other objects or personal injuries. During
transportation, use transportation measures adequate for the weight of the
appliance. The appliance should not be dragged nor tilted, but lifted perpendicularly
to the ground and handled in horizontal direction.
5.1.2
Place of Installation
•
The appliance must be located in a closed and well-ventilated room (not outside).
•
The surface under the appliance must feature load-bearing capacity suitable for the
appliance's weight with maximum load.
•
The appliance must be positioned on even surface to avoid its slipping or turning
over.
•
Remember, that after placing the appliance, there must be enough room to fully
open the door of the appliance.
•
Place the appliance on a stable and dry surface that features water resistance and
high temperature resistance. The place of installation must be easily accessible and
sufficiently spacious to allow for easy operation of the device and good air circulation.
•
Never
position the appliance directly next to walls, furniture, or other objects made
of flammable materials. Follow fire protection regulations in force.
•
Never
place the appliance in the vicinity of flammable materials or containers
with flammable materials (walls, furniture, partition walls, gas cylinders): this may
pose a fire hazard. If it is impossible, flammable elements should be isolated with
non-flammable thermal insulation materials, paying the highest attention to the
conformity with fire prevention regulations.
•
The appliance is not designed for installation inside a furniture piece.
