Bartscher 700FX-GL20, Руководство пользователя

Страница: 19 / 24

Installation Instructions
284422 17 / 22
EN
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Screw 4 feet in.
– To level the appliance, you may adjust the height of feet.
IMPORTANT!
Never use the appliance without feet.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Leave at least 10 cm clearance from flammable walls and items.
5.2 Electrical Connection
• Verify if the technical specification of the appliance (see the rating plate)
corresponds to the characteristics of the local electric mains grid.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• A circuit breaker of sufficient capacity to disconnect all poles from the power
supply must be installed upstream of the appliance, in an easily accessible
place; its contact opening width must ensure complete separation according to
overvoltage category III, in accordance with the installation regulations. The
maximum permissible leakage current of the appliance is 1 mA/kW.
• Flexible, oil-resistant rubber hoses type H05RN-F or H07RN-F must be used for
connection. Cord cross-section is stated in the technical data table.
• Connect the power cord to the terminal block according to the wiring diagram
supplied with the unit.
• Secure the part of the power cord outside the appliance with a metal tube or
rigid plastic hose.
• In the event of damage to the power cord, have it repaired by the manufacturer,
service company or a professional to exclude any risk.
• Connect the electrical appliance to a working earthing.
• Connect the protective conductor to the terminal marked with the earth symbol
next to the input terminal block.
• Connect the metal structure of the electrical appliance to a protective
equipotential bonding device.