- 43 -
Display
When the device is on, at the normal operation of the device, the interior temperature is
displayed, except defrosting when the display shows
“dEF”
.
When the device is switched off with the
ON/OFF
switch the display is off as well.
When the device is in a “snooze” mode the LED
glows.
Modification/Setting of the set temperature
1. Make sure that the buttons are not blocked and there is no on-going process.
2. Hold
the button pressed for a short time until the LED control
starts
flashing.
3. Press repetitively
or
during 20 seconds.
4. The set temperature value appears on the display.
5. Hold
the button pressed for a short time to confirm or do not introduce
any data for 20 seconds: LED control
stops flashing.
NOTE!
Contact the service if you need to modify any other parameters.
Automatic defrosting
At the default setting, the automatic defrosting is performed every 6 hours. The first
defrosting circle starts when you switch on the device for the first time.
Defrosting lasts 20 minutes. The next defrosting circle starts after 6 hours.
Note:
Drip water evaporates automatically (container on the rear wall).
Activation of manual defrosting
1. Make sure that the buttons are not blocked and none of the processes is in progress.
2.
Press and hold the button
for 5 seconds. Defrosting shall be activated
immediately. The defrosting LED indicator
glows and remains glowing until the
defrosting has finished. The next defrosting process starts 6 hours after the end of the
previous defrosting.
