- 31 -
Problem
Cause
Solution
Too low of a
temperature in
the device
•
Too high of a temperature
•
Adjust the thermostat
higher
Noise level too
high
•
The device is not standing on
a level surface
•
The device touches walls or
other objects
•
Set the device on a level
surface
•
Ensure a sufficient
distance from walls or
other objects
Water
condensates
inside the device
•
Slightly opened door
•
The door is open too long
•
Check that nothing
prevents the closure of the
door. Close the door
•
Minimize the time the door
is open. Limit opening the
door
Water
condensates
outside the
device
•
Slightly open door, too great
of a difference between the
cold air from the device and
the room temperature
•
Check that nothing
prevents the closure of the
door. Close the door
The door does
not close
properly
•
The device is not standing
on a level surface
•
The door seal is dirty or
deformed
•
Set the device on a level
surface
•
Clean the seal, replace in
the event of deformation.
Contact a salesperson
The above described problem cases are given for orientation and as examples.
Should these or similar problems occur, please turn off the machine immediately
and don´t use it anymore. In order to check and repair your machine, please contact
a qualified expert or the manufacturer immediately.
The following are not malfunctions:
1. Sound of flowing eater. This sound occurs during normal use of the device. This is
the cooling device inside the refrigerator.
2. Condensation forming on external glass surfaces in times of high humidity is normal.
Wipe condensation with a dry cloth.
3. The compressor’s surface may be hot during normal use.
WARNING! Danger of burns!
Do not touch the compressor’s surface with bare hands.