- 26 -
5.3 Operating
•
Before using the device and its equipment it should be cleaned with warm water and
a mild detergent. Rinse with clean water. Thoroughly dry the device.
•
Before connecting to the power supply, the correctly set device must be left for 4 hours.
•
Connect the device to a single, grounded socket.
Operating elements
Lighting
•
The device is equipped with interior lighting, upper LED lighting and a light switch
located inside the device.
•
If necessary, you can turn on (ON position) or off (OFF position)
the interior lighting
with the switch.
Thermostat
•
The temperature is set by the thermostat. It is also located in the upper part of the
housing inside the device.
•
To set the temperature, turn the thermostat to the desired position (adjustment
range 1 - 7) by turning it clockwise.
•
The "1" position corresponds to the highest and the "7" position corresponds to the
lowest temperature setting (for temperature range, see point 4.2 "Technical data").
•
To turn off the device, set the thermostat to the "0" position.
•
When turning on the device for the first time or after a prolonged period of not being
used, the temperature should be set at "7" position for at least 3-4 hours before
placing bottles in the wine refrigerator. Then set the desired temperature.
Upper LED lighting
Light switch
Thermostat
