- 25 -
5.2 Operation
Before the first use
•
Before the first use, the device should be thoroughly cleaned according to the
instructions in section
6 “Cleaning“
, whereas possible remnants after the
manufacturing process or packaging should be removed in a safe way.
Finally, dry all the cleaned parts.
•
Place the enclosed filling funnel on the housing and the collection tray under the
opening for collecting ice.
CAUTION!
For safety reasons the device may work only when the filling funnel is
placed on the housing and the tray for crushed ice is properly placed
(hooked) under the opening for collecting ice. Only then the safety switch
will operate.
If the filling funnel or the collection tray for crushed ice is removed,
the device will automatically switch off.
Ice crushing
•
Connect the device to a single grounded socket.
•
Switch the device on by turning
ON/OFF
switch to the
“I“
position.
CAUTION!
Only ice cubes made in an ice dispenser should be crushed in the device,
and not ice cubes from the freezer!
•
Fill the funnel located at the top of the device with prepared ice cubes and start the
process of ice crushing. Switch the device on (set the
ON/OFF
switch in
”I“
position
)
.
CAUTION!
Ice made in the first cycle after cleaning should be removed for hygienic
reasons and not used for drinks, because traces of cleaner could be left in
the interior of the device.
