
- 37 -
Do not immerse the device in water or use it when the plug or
power cable is wet. If such a case occures while operating, put
on the rubber gloves and pull out the plug immediately.
Do not
touch or remove the device when immersed in water until
the plug is pulled out from the power supply socket.
Do not
use the device when removed from water (dispatch it immedia-
tely to the authorised service point or your vendor).
Check the power cord regularly for damage. Do not use the
device if the power cord is damaged. If this cable is damaged, it
must be replaced by customer service or a qualified electrician in
order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the
electric shock
hazard
will occur.
Do not use any acid agents and make sure no water ingresses
the device.
Never
operate the device with moist hands or standing on wet
floor.
Remove the plug from its socket:
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.