Cleaning
370235
15 / 19
EN
6
Cleaning
6.1
Safety Instructions for cleaning
• Before cleaning, disconnect the appliance from the power supply.
• Leave the appliance to cool down completely.
• Make sure water does not enter the appliance. Do not immerse the appliance in
water or other liquids during cleaning. Do not clean the appliance with a
pressurized water jet.
• Do not use any sharp or pointed, nor metal implements (knife, fork, etc.). Sharp
or pointed implements may damage the appliance, and when in contact with live
parts, they may cause electric shock.
• For cleaning, do not use any scouring agents that contain solvents nor corrosive
cleaning agents. They may damage the surface.
6.2
Cleaning
Appliance Disassembly
The appliance should be disassembled the following way:
– screw the locking ring off, turning it counter-clockwise and remove it,
– remove all components from the worm housing (perforated disk,
stainless steel blade, worm shaft),
– remove the pusher from the filling shaft,
– remove grinder funnel from the worm housing,
– turn the locking ring counter-clockwise to screw the worm housing off,
– to end with, remove the worm housing from the appliance,
– remove residues of processed food products from the worm housing and
filling shaft.
NOTE: Clean the appliance directly after each use and do not let the
residues of food products to dry up on the housing nor any other
component of the meat grinder.
Содержание 370235
Страница 1: ...FW200 370235 ...