Bartscher 3010, Оригинальное руководство пользователя, Страница: 9 / 12

500308 9 / 12
EN
2. For wall mounting use 4 M8x60
anchor bolts with expansion
sleeves (Fig. to the left).
Fig. 8
3. Hold the chip cutter against the wall and use openings in the frame to mark
boring points in a selected location.
4. Bore 4 holes in the wall in marked points.
5. Insert 4 anchor bolts with expansion sleeves in the bored openings.
6. Then, introduce anchor bolts with expansion sleeves into the wall only to the
depth that makes it possible to fix the chip cutter with the frame on them.
7. Hang the chip cutter on anchor bolts. Insert washers on both sides of openings
in the frame.
8. Then fix nuts on anchor bolts.
9. Place a suitably large container
directly underneath the chip cutter
for the purpose of collecting cut
chips or other products.
10. Pull the handle downwards and cut
chips.
Fig. 9