Bartscher 206790, Инструкция по эксплуатации

Страница: 67 / 292

- 63 -
Disturbance Cause Remedying
Cooking / baking
result uneven
•
The fan does not perform
reversing the direction of
rotation
•
The fan stands still
•
One of the resistors is
defective
•
Contact the customer
service
•
Contact the customer
service
•
Contact the customer
service
Upon activation of
the steaming water
is not delivered
from the hoses
•
The water supply is closed
•
The connection to the
water network is not carried
out correctly
•
Water inlet filter is clogged
by dirt
•
Open the water supply
•
Check the connection to
the water network
•
Clean the water inlet filter
Water escapes
from the seal when
the convection
oven door is
closed
•
Dirty seal
•
Seal damaged
•
There exists a problem
when closing the oven door
hot air
•
Clean the seal with a moist
cloth
•
Contact the customer
service
•
Contact the customer
service
The fan stops
during operation
•
Safety thermostat of the
engine has been triggered
•
Fan motor is damaged
•
Switch the oven door hot
air off and wait that the
overheating protection of
the engine will automati-
cally start up again.
In case the problem is
repeated, contact the
customer service
•
Contact the customer
service
If you cannot remove the malfunctions:
-
do not open the housing,
-
notify the customer service point or contact the sales agent,
while providing the following information:
type of malfunction;
article and serial number (rating plate at the rear of the device).