Installation and operation
22 / 28
1043613
EN
Appliance Start-up
NOTE!
The below indications refer to any crêpe plate.
Fig. 4
1. Adjustment mark
2. OFF position
3. Ignition position
4. MAX setting
5. MIN setting
1. Before you ignite the gas flame, make sure the gas controller is in OFF position
(2, Fig. 3).
Gas valve is closed.
2. Press the corresponding gas controller, and while keeping it pressed rotate it
counter-clockwise to ignition position (3).
3. Keep the gas controller pressed in this position and at the same time operate
the ignition button, located next to the gas controller.
4. Keep the ignition button pressed for approx. 5
–10 seconds until the burner
ignites.
5. Following ignition release the ignition button.
6. Pay attention to the flame stability.
7. If the flame is not stable, rotate the gas controller to OFF position (2), wait for
approx. 5 minutes, and then repeat the ignition process described above.
8. To work with maximum power, rotate the gas controller to MAX position (4).
9. To work with minimum power, rotate the gas controller to MIN position (5).
10. To reach the optimum temperature for cooking crêpes, rotate the gas controller
between MAX and MIN positions.
Содержание 1CP400G
Страница 1: ...1CP400G 2CP400G 1043613 1043623...
