- 27 -
Check the power cord regularly for damage. Do not use the
appliance if the power cord is damaged. If this cable is damaged,
it must be replaced by customer service or a qualified electrician
in order to avoid dangers.
The supply cable must be disconnected from the socket
only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of
electrical or mechanical modifications the
electric shock
hazard
will occur.
Do not use any acid agents and make sure no water ingresses
the device.
Never
operate the device with moist hands or standing on wet
floor.
Disconnect the device from the electric power supply.
-
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
HOT SURFACE! Burn hazard!
Follow the safety instructions listed in order to avoid the hazard:
The heating plates and external surfaces of the device become
very hot during the operation. In order to avoid burns never
touch those surfaces with bare hands and use only handles and
temperature controller knob during the operation.
