Bartscher 190031, Руководство пользователя

Страница: 16 / 44

Installation and operation
14 / 44 190031
EN
– sufficiently large, and thus enabling usage of the appliance with no
problems;
– easily accessible;
– well ventilated.
• Maintain sufficient clearance from table edges. The appliance might turn over
and fall down.
• Mind the sufficient clearance from the walls and other flammable objects or
objects that are prone to discolouration. This clearance must be at least 5 cm
from the back and both sides, and 15 cm from the top. Note the fire safety
provisions at the place of installation.
• When in operation, the appliance may not be installed in a cabinet.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• Do not use the appliance with an external timer or remote control.
Water Supply
For the purpose of supplying water, the appliance comes with a factory-installed
water tank.
If needed, the appliance may be connected to water mains system or external water
tank (which is located at the same height as the appliance).
In order to utilise the connection, consider the following information:
– max. input water pressure is 3 bar
– min. input water pressure is 1 bar
Important Indication:
Starting with water hardness of 5° dH (German degrees), a water softening
device should be installed. We recommend the following products from
our range:
– Water filtering system for coffee makers, art. No.
109881
– Water softening device, WEH1350, art. No.
109878