- 46 -
Fig. 7
Fig. 8
After the drying phase, cutlery leaves the cutlery polishing machine through the
cutlery output and fall the cutlery collection basket (fig. 7) or the cutlery collection
sieve with cutlery collection basket (fig. 8).
In the upper area of the cutlery output
there is a blower which prevents the
granulate from leaving the device with
cutlery.
Furthermore, there is an UV lamp in
this area which disinfects the cutlery.
Fig. 9
If a piece of cutlery gets stuck and
blocks the transport channel, you can
easily open the device cover.
As soon as the cover is opened, a
micro-switch embedded in the cover
disconnects the motor and heater.
Remove the cover of the transport
channel to diagnose the malfunction
and fix it (fig. 10).
Reinstall removed elements, close the
cover and continue the drying process.
Fig. 10
If the device is no longer used, switch it off using the
START/END
button. The device
continues to work for ca. 10 min. drying the granulate. After expiry of this time, the
device is switched off. Unplug the device.