- 45 -
Loading of the cutlery polishing machine
Switch the device on by pressing the ON/OFF button (2).
Press the
“START“
button
(3) to start the device.
Before placing the cleaned cutlery in the cutlery input opening, wait until
“Heating“
indicator light
goes off.
CAUTION!
Load the device only with properly cleaned cutlery (no fat or oil residues),
to avoid damaging the surface of the dryer’s drum.
Place the supplied cutlery collection basket (Code-no.110431, fig. 7), or cutlery
collection sieve (Code-no. 10432, fig. 8) under the cutlery output.
Place the cutlery for drying into the cutlery input at the side (Code-no. 110431, fig. 5)
or on the (Code-no. 110432, fig. 6)
NOTE!
Load the cutlery to the cutlery input opening adding them gradually to
avoid mixing them up.
Fig. 5
Fig. 6
Cutlery goes to the dryer’s drum with the maize granulate and is dried there (fig. 10).