Bartscher 1500/17, Оригинальное руководство пользователя

Страница: 19 / 28

Installation and operation
110431 17 / 26
EN
CAUTION!
Never leave the cutlery polishing machine on if the drier's drum has not
been filled with the maize granulate to avoid overheating and damaging
the housing of the drier's drum.
Loading the Cutlery Polishing Machine
1. Switch the appliance on by pressing the ON/OFF switch (2).
2. Press the 'START' key (3) to start the appliance.
3. Before you put the cutlery in the cutlery input opening wait for the 'Heating' LED
indicator light (7) to light up.
CAUTION!
Load the appliance with properly cleaned cutlery (no fat or oil residues)
only, to avoid damaging the surface of the drier’s drum.
4. Place the supplied cutlery collection basket (Art. No.110431, Fig. 7) or cutlery
collection sieve (Art. No. 110432, Fig. 8) under the cutlery output opening.
5. Place the cutlery for drying into the cutlery input opening at the side (Art. No.
110431, Fig. 5) or on the top (Art. No. 110432, Fig. 6)
NOTE!
Load the cutlery to the cutlery input opening adding them gradually to
avoid mixing them up.
Fig. 5 Fig. 6