Bartscher 1500/17, Оригинальное руководство пользователя

Страница: 18 / 28

Installation and operation
16 / 26 110431
EN
Operation Description
Switch-On Phase
1. Plug the appliance into a suitable single socket.
2. Press the ON/OFF switch (2) to switch the appliance on.
The cutlery polishing machine is ready for operation.
3. Press the 'START' key (3) to start the appliance.
Drying Cycle
1. Wait for the appliance to reach the operating temperature.
The 'Operating Temperature Reached' LED indicator light (6) will light up
concurrently with the 'Heating' LED indicator light (7).
2. Operate the appliance as described in section
'Loading the Cutlery Polishing
Machine' .
Switch-Off Phase
1.
After using the appliance, press the END key (3) to start the appliance’s switch-
off phase.
The appliance is switched off after approx. 10 minutes, whereas 'Power' / 'Cycle
Switch-Off' LED indicator light (5) is flashing.
When this time elapses the appliance stops and the 'Power' / 'Cycle Switch-Off'
LED indicator light (5) remains on in continuous mode for the remaining duration of
the drying cycle.
The switch-off phase is necessary to allow for full drying of the maize granulate.
Loading Appliance with Maize Granulate
1. Switch the appliance on by pressing the ON/OFF switch (2) and then press the
START key (3).
2. Slowly fill the cutlery input opening to the right side or at the top with appropriate
maize granulate.
NOTE!
Always add the exact quantity of the maize granulate, as presented in the
'Technical Data' table for a given appliance.