Bartscher 150.5011, Инструкция по эксплуатации

Страница: 15 / 20

- 15 -
SEMIAUTOMATIC OPERATION: END OF COOKING TIME. Press the End of cooking time button and set the required time with the
+/- buttons. The A symbol (automatic program) and the pot symbol appear. The relay output is activated. At the end of cooking the
acoustic signal sounds, the relay is deactivated and the A symbol flashes.
AUTOMATIC OPERATION: DURATION, COOKING END AND START TIME. Press the Cooking time button and set the duration with
the +/- buttons. The A symbol (automatic program) and the pot symbol appear. The relay output is activated. Then press the End of
cooking time button and set the required time with the +/- buttons. In this way a delayed start of cooking time can be determined. If the
setting is not correct an acoustic signal warns of the programming anomaly. At the end of cooking the acoustic signal sounds, the relay
deactivates and the A symbol flashes.
TIMER (CONTROL OF MINUTES WITH SUBSEQUENT ACOUSTIC SIGNAL). Press the Timer button and set the required time with
the button and the +/- buttons. The bell symbol is lit while the set time passes. The acoustic signal sounds at the end of the set time.
ACOUSTIC SIGNAL. The acoustic signal sounds for 7 minutes at the end of the control cycle or the cooking program. Press any one
of the three function buttons (Timer, Cooking time and End of cooking time) to switch off the signal. Press the button (-) to personalise
the acoustic signal tone.
PROGRAMMING CHECK AND SETTING ERRORS. Any programming in progress can be checked by pressing the specific function
button. Any programming error is signalled by the acoustic signal and intermittence of the A symbol.
CANCELLING A PROGRAM. A program can be cancelled by selecting the manual function (press the Cooking time and End of cook-
ing time buttons simultaneously).
ELECTRONIC TIMER
SETTING THE EXACT TIME (CLOCK). Press BUTTON 1 and release. Press BUTTON 3 for the numerical progression (+) and
BUTTON 2 for the return (-). After setting the EXACT TIME wait 10 seconds for automatic storing of the operation.
TIMER SETTING. Press BUTTON 3 for the numerical progression (+); press BUTTON 2 for the return (-). Times from a minimum of 10
seconds to a maximum of 10 hours can be set. The countdown will be displayed after about 5 seconds, after which the acoustic signal
sounds.
STOPPING ACOUSTIC SIGNAL. Press BUTTON 3.