![background image](http://html.mh-extra.com/html/bartscher/135105/135105_instruction-manual_477035023.webp)
- 22 -
•
Attach the shaker to the unit. Ensure that the upper
edge is properly attached to the shaker clamp, as
this is the only way to ensure contact between the
shaker and micro switch.
CAUTION!
Use only the shaker supplied with the unit!
•
If the mixing tip is properly attached to the shaker clamp, the bar mixer can be
turned on by using the switch. First, turn the switch to speed „I“ (slow), then to
speed „II“ (fast).
WARNING! Danger of injury!
Never insert hands, spoons or any other objects into the shaker when the unit is
turned on!
Failure to follow these instructions may lead to serious injuries and cuts caused
by the mixing tip, as well as damage to the unit.
•
Mix the ingredients until the desired consistency is reached (1-2 minutes).
•
If the beverage is mixed properly, turn the switch to the position marked „O“ (OFF)
and remove the shaker, lifting it slightly up by the handle.
•
Pour the beverage out from the shaker and serve.
•
Remove the plug from its socket if the unit is not to be used any longer.
Tips and advice
•
Most beverages can be prepared in less than two minutes.
•
When preparing fruit cocktails never use whole fruits but rather chopped fruit or pulp.
•
The shaker must always be filled to the minimum filling volume mark, so that the
mixing tip can properly mix the beverage.
•
When preparing drinks of a thinner consistency, do not exceed the maximum filling
volume mark to avoid spilling of the beverage while mixing.
•
For best results, use chilled ingredients. Milk cocktails are best if prepared using
cold milk. The colder the milk, the thicker and foamier the beverage will be as a
result.
•
Syrups and powders should be added directly prior to mixing so that they do not sink
to the bottom of the shaker.