Bartscher 124L, Оригинальное руководство пользователя

Страница: 21 / 25

Installation and operation
700121 19 / 25
EN
Message Description
Message Icon Status Meaning
Setting
ON
Setting parameters of temperature
measurement and control
OFF
Control
ON Operating
OFF Switched off
FLASH Delay process
Heating-up mode ON Heating-up in progress
Cooling mode ON Cooling process in progress
Defrosting ON Defrosting process in progress
Operation parameters setting
Factory default temperature range is 1 °C
– 10°C.
1. To change temperature value, keep the button pressed for 3 seconds, in
order to call up parameter setting mode.
The digital display shows .
2. When this message is shown, press the button, in order to show current
temperature value inside the appliance.
The temperature may be set with 1 °C increments.
3. Press the or the button until the desired temperature is displayed.
4. Press the button again, in order to save the setting and complete parameter
setting.
If no button is pressed within the next 30 seconds, the digital display will show
current temperature inside the appliance.
NOTE: If additional parameter settings are to be introduced, contact
technical service.
Lighting
The appliance is equipped with LED lighting. It is located inside the appliance, in its
top section.
1. Press the button, to switch on the LED lighting.
2. Press the button again, to switch off the LED lighting.