Bartscher 114270, Оригинальное руководство пользователя

Страница: 14 / 15

Installation and operation
12 / 15 114270
EN
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
5.2 Operation
1. Before use, clean the appliance, observing instructions in section
6 “Cleaning”
.
2. Screw the enclosed infrared lamp into the fitting.
3. Connect the appliance to a single grounded socket.
4. Prepare food.
5. Place a plate with hot food underneath the heat lamp.
6. Maintain clearance of at least 30 cm between the lamp and the food.
7. Start the ON/OFF switch.
CAUTION!
Risk of burns!
The outer surface of the vented steel reflector is very hot during
operation.
Never touch the hot surface of the appliance.
Leave the heat lamp to cool down before you attempt to move it around.
8. If the heat lamp is not used, switch it off with the corresponding ON/OFF switch.
9. Disconnect the heat lamp from the power supply.