- 23 -
Maintenance of the operational performance
Regularly control the water filter system.
Inspect the tightness of the water filter system. In case of any leakages through
connection joints or sealing, seal or replace the elements.
Check the hoses for bends, bended hoses should be replaced.
Replace hoses periodically, at least every 5 years, or earlier if necessary.
Do not use abrasive agents, cleaning solutions or coarse cleaning materials.
Waste disposal
Dispose of the decommissioned device according to the national regulations.
For this purpose, contact a local waste management agency.
8. Possible malfunctions
Problem
Cause
Solution
No water flow
Closed water inlet
Open the shut-off valve on the
water inlet
Pressure too low
Too low pressure in the
installation
Check the pressure in the water
supply network
Clogged hoses or filter
Check the water filter system,
water inlet and drain hoses,
replace if necessary
Air in the installation
Check the installation, bleed the
air from the system
Leakage
Incorrectly installed pipe
unions
-
Check the entire fittings,
gaskets for leakages, replace
if necessary.
-
If the problem persists, replace
the filter.
Excessive pressure in the
water installation
-
Check the pressure in the
water supply network.
-
Reduce the pressure
upstream of the filter, replace
the filter
