Bartscher 100083, Оригинальное руководство пользователя

Страница: 13 / 19

Installation and operation
100083 11 / 19
EN
• Keep minimum distance from walls and objects; maintain clearance of 15 cm at
both sides and at the rear, and 20 cm over the appliance.
• The appliance should be installed only in rooms, in which ambient temperature
falls in the range of 10°C
– 32 °C.
Power supply connection
• Verify if technical data of the appliance (see rating plate) correspond with the
local electric power grid specification.
• Connect the appliance to a single, properly grounded mains socket with
protective contact. Do not connect the appliance to a multi-socket.
• The power cord should be laid in a way preventing anyone from threading on it
or tripping against it.
• If in winter the ice-cube maker is brought from the outside to a room, leave it for
a few hours to heat up and reach the room temperature before switching it on.
• Before connecting the appliance to the power supply, wait 1 hour for the coolant
to stabilize.
• After a power failure or when the plug is removed from the socket, reconnect the
appliance to the power supply after 5 minutes at the earliest.
•
The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y. The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y. The el ectric soc ket s hould be easil y accessibl e s o it is pos sibl e t o quic kl y disconnect t he power c ord when nec ess ar y.
5.2 Operation
Preparation of the Appliance
1. Prior to first operation, clean the appliance and its equipment according to
instructions in section
6 “Cleaning”
.
2. Finally, dry the appliance and accessories thoroughly.
3. Insert the storage tank.
4. Remove the water tank lid.
5. Fill the water tank with fresh drinking water.
NOTE: Do not fill with water the tank underneath the storage container.
6. Make sure the water level does not exceed the 'FULL' marking.
7. Place the lid on the water tank.